JPM CLASSICS
PARTS
During the restoration of my DB2 LML 233, the original front grille was beyond repair, so it had to be completely recreated from scratch.
This involved developing specialised tooling to reproduce the correct slat profiles and traditional construction methods, including gas welding, brazing, spot welding, and soldering. All parts are made in-house with close attention to the original design and finish, with painting also available in our workshop.
​
Please get in touch to discuss individual requirements.
Aston Martin DB2, DB2/4 Grilles & Trim Components:
Grills
-
Complete DB2 Grilles
-
DB2 Grille Slats
-
Restoration
Trim Parts
-
Steel grille frames parts
-
Front, rear and side bumper trims
-
Interior door trims
-
Individual grille components
Complete DB2 Grilles
Complete DB2 grilles can be produced using the same tooling and traditional construction methods.
​
Each grille is assembled using individually formed slats mounted to the frame in the same manner as the original factory construction, allowing the finished grille to follow the correct curvature of the car’s nose.
​
These are produced in small numbers and generally made to order.
​
Components can be supplied in a range of finishes including:
​
Bare brass
Nickel plated
Chrome plated
Painted to order
Prices for complete grilles start from £3,500 depending on specification and finish.
DB2 Grille Slats
Replacement grille slats are available for owners repairing or rebuilding original DB2 grilles.
​
The DB2 grille uses various slat types, including long, short, angled and straight sections. All of these components can be reproduced individually as required, allowing damaged or missing sections of an original grille to be repaired accurately.
​
Each slat is formed in brass using dedicated tooling developed to reproduce the correct section and proportions.
​
The slats are constructed using the same traditional method as the original factory grille, with individually formed slats mounted to the frame so that the grille follows the correct curvature of the car’s nose.
Components can be supplied in a range of finishes including:
​
Bare brass
Nickel plated
Chrome plated
Painted to order
​
Typical prices start at:
-
Short slats – £75 each
-
Long slats – £100 each
Restoration of Original DB2 Grilles
Where possible, we strongly support repairing and restoring original DB2 grille assemblies rather than replacing them entirely.
Original grilles often carry stamped body numbers on the frame, which form part of the car’s history. Retaining these original components is therefore highly desirable whenever restoration can be achieved.
​
Using the tooling developed for these parts, damaged or missing sections can often be repaired by replacing individual slats or remaking corroded steel components while retaining the majority of the original frame. This approach allows owners to preserve as much original material as possible, while restoring the grille to its correct appearance and structural integrity.
​
Please get in touch to discuss the repair or restoration of original DB2 grille components.
